hi, i've tried many combinations but if i can manage the lfo to work i also have an audiosignal from the lfo coming through !

the lfo must the first in the fx list. i have to route this sinus audio from the lfo to a paramterautomation (using adioparameterautomation) in the same track but im struggling with the tracks and busses because the lfo is audio and i have to route the lfo to silent tracks.

i use this lfo as you can see in the animated gif grafic the audio output from this lfo is used to automate parameters that can't be automated from elsewhere. if have my fx stack setup like this: 1. lfo 2. reaComb no i have the problem to route the lfo so, that i can't hear it but the modulating of reaComb is going on. you can check this if the threshold level vu meters are not longer moving but the parameter is chaning at lfo speed. i've setup the audio control signal under the parameter modaltion to the lfo. now i am struggling with the track routings!

If I understand correclty, you have to setup the track in a way that it has 4 channels, route the output of the lfo to channals 3 and/or 4 and then use in ReaComp at "Detector Input" "Auxiliary Input L" and/or "Auxiliary Input R". If that's what you mean? However, I quite can't understand what you want to achieve, because you can modulate ReaComp's parameters via parameter modulation. -Data

no, simply i want to use that JS lfo in the way as the .gif shows but without effecting the fx module wich comes next to the lfo. the reacomp was only a example.

As you can see in the .gif, you have to put the output signal of the lfo on channels 3 and 4 To achieve this you first have to enable the track to handle 4 audio channels. Click on the I/O button and at "Track Channels:" select 4 from the rolldown. When you now look at the fx window of the lfo, you see a button "4 in 4 out", click on it an in the right matrix select "JS output 1 -> 3" and "JS output 2 -> 4". All other positions in both matrices should be unchecked. In the envelope modulation window "Track audio channel:" has also to be set to "3+4". -Data

thats it. my fault was my wrong matrix setup (the red or the blue pill?) cheers and thankyou

No prob! :) -Data